• Lock gate opener arms to the gate
• Lock the pin on an automatic gate lock
• Lock existing push buttons

• Innovative Edge Kit
• Protects up to 8 entrapment points
• Receiver accepts up to 4 transmitters
• Bluetooth® transmission up to 130 ft. range

• Can be used as an exit loop, safety loop or center loop
• 8 sensitivity settings
• Designed for LA400PKGU, LA500PKGU, LA5001PKGXLMU, LA412PKGU, RSW12U, RSL12U, CSW24U, CSL24U, SL3000501U, SL3000101U, SL585, SL595, CSW200501U & CSW200101U

• Provides flexible cushion to leading or trailing edge of a 2" gate frame
• Easily attaches to gate with screws

• Provides flexible cushion to leading or trailing edge of a 2" gate frame
• Easily attaches to gate with screws

• Added gate safety - when touched, edge sensors signal gate opener to stop and reverse.
• Easy installation on standard 2" square gate frames
• 3-sided activation

• Reflects the safety beam back to the receiver/transmitter unit
• For EMX NIR-50 photo eyes

• Reflects the safety beam back to the receiver/transmitter unit
• For EMX NIR-50 photo eyes.

Quick Facts: 

• Easy to install and setup
• 10 sensitivity settings
• Lightning and surge protection
• 4 operating frequencies
• UltraMETER™(displays optimum sensitivity setting / diagnostic aid)

• Low voltage: 10V to 30V AC/DC
• 20μH to 1500μH loop inductance (including lead-in inductance)
• Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
• Output relay rating of 3 amp @ 300 volts AC and 150 volts DC
• Size dimensions: 2.36in.(H) X 1.75in.(W) X 3.92in.(L)

• Low voltage: 10V to 30V AC/DC
• LOOP Inductance: 20μH to 1500μH (including lead-in inductance)
• Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
• Operating Voltage: 10.5 volts to 30 volts AC or DC @ 35 milliamps
• Output Rating; 1 amp @ 125 volts AC general use, 1 amp at 30 volts DC
• Size dimensions: 1.40"(H) X 1.40"(W) X 2.75" (D)

• Specifically designed for solar powered gate applications
• Use as safety loop detector, exit loop detector or shadow loop detector
• Use with a preformed loop or make your own
• Compact, fits in almost all control boxes

• Only compatable with Chamberlain Elite Gate Operators
• Use as center loop detector, exit loop detector or hold open loop detector
• Use with the OmniControl Board

• Compatible with gate openers sold on GateCrafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 40 feet of lead

• Compatible with gate openers sold on GateCrafters
• For installation in asphalt or concrete 3/16 saw-cut groove
• Custom designed polyethylene wedge shaped jacket with wings (built in backer-rod)
• Pre-phased at the factory
• Loop wire jacket and lead-in jacket are the same size
• Pre tested at factory 3 ways
• 50 feet of lead

• Compatible with gate openers sold on GateCrafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 60 feet of lead

• Compatible with gate openers sold on GateCrafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 100 feet of lead

• Compatible with gate openers sold on GateCrafters
• For installation in asphalt or concrete 3/16 saw-cut groove
• Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)
• Pre-phased at the factory
• Loop wire jacket and lead-in jacket are the same size
• Pre tested at factory 3 ways
• 100 feet of lead

• Sold in Sets of 1 at 30oz
• Seals up saw cuts in your driveway

• Use on a 7 or 7 ¼ Circular Saw (5/8"-7/8" Arbor)
• 3/16th Wide

• Sold by the case (12- 30oz tubes)
• Seals up saw cuts in your driveway

• Use on a 14 Concrete Saw (3/4"-71" Arbor)
• 3/16th Wide

• Checks Safety & Exit Loops Functionality
• Compact Design
• Green Light/Red Light Indicators
• No Battery Replacement Needed

• 30' Range
• 12/24 DC or AC voltage
• Egg Shape helps to deflect rain and snow

• Type B1, non-contact sensor
• UL 325-2016 compliant
• Operating range up to 60 ft. (18.3 m)
• Compatible with many operators

• Angle of detection: +/- 4 degrees
• Range: 100 ft.
• Response Time: 10ms
• Power Supply: 24VDC

• 50 foot operating range
• Compact size
• Adjustable sensitivity
• Weatherproof, IP66 enclosure
• UL 325 compliant safety exit device

• Includes Receiver and Transmitter units
• Max distance of 50 feet
• Prevents gate from closing on vehicle

• Includes Receiver and Transmitter units
• Max distance of 50 feet
• Prevents gate from closing on vehicle

• 30' Range between sender and receiver
• 12 volt design
• LEDS for alignment and troubleshooting
• Pulsed infrared dual beams
• Universal mounting to any solid surface

• Utilize the latest photocell technology
• Blue Bus communication systems
• Compatibility: works with 936 and 1050 Control Boards.

• Compatible with all photo eyes
• Solid black to blend with any gate or landscaping theme
• Available in 2 optional heights: Car (30" tall) or Truck (36" tall).
• Comes with cap

Quick facts:

• Two models - Micro Switch or Knox Lock Cutout
• Post Mount
• Heavy metal, powder coated
• Bright red color

• Compatible with gate openers sold on GateCrafters
• For installation in asphalt or concrete 3/16 saw-cut groove
• Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)
• Pre-phased at the factory
• Loop wire jacket and lead-in jacket are the same size
• Pre tested at factory 3 ways
• 20 feet of lead