|
Part of the Era-EP series, The Nice Apollo EPMORB/A Reflective Photocell is designed to be fast and simple by the incorporation of BlueBUS Technology. Its simplicity applies to just about any application by only requiring two wires which are installed to the photocell. Special reflective sensing techniques avoid interference due to automatic synchronization. This photocell includes an optional LED light for illuminating the transit area and can also provide diagnostic feedback for troubleshooting. The Nice Apollo EPMORB photocell is an external entrapment protection device type B1 and complies with UL 325 requirements (US only) & (Type D according to the EN 12453 standard)
-Estimated radio range (m): 8 (15 in optimal conditions)
-Power Supply: 12-24 V
-Absorption (mA): 50
-Protection class (IP): 44
-Operating temperature (°C Min/Max): -20°C to +50°C
-Relay range: Max 500 mA and 48 V
-Dimensions (mm): 105 x 50 x 40 h
-Weight (g): 83 g
-Warranty: 1 Year
|
GateCrafters.com offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
Nice Apollo EPMORB/A Medium Reflective Photocell Photoeye With BlueBUS Technology
The Nice Apollo EPMOR device is part of the Era-EP series and is designed for fast, easy, and reliable installation. Automatic synchronization avoids possible interference between multiple photocell pairs, made possible by a reflective technique of sensing. Built in LED provides diagnostic indications and can be installed to illuminate the transit area and can act as a flashing light. Anti-glare circuit eliminates the possibility of sunlight interface. The EPMOR photocell utilizes BlueBUS Technology, allowing communication between the photocells and communication control unit. This connection is made possible through reflective technology that only requires two wires to be installed to the main photocell. The Nice Apollo EPMOR device is the perfect universal option for new or existing automation systems making it a fast and easy solution for just about any application. Installation, wiring, programming and maintenance must be performed by qualified technicians, in compliance with the applicable laws, standards, and local regulations to avoid safety hazards. In case of any malfunctions, contact the Nice technical assistance to verify that installation conditions are compatible with the application. Regular scheduled maintenance is to be performed at least every 6 months. The Apollo EPMOR device is designed to work for at least 10 years under normal conditions and then it is recommended to service more frequently. Use a slightly damp soft cloth to clean the housing, lenses, & glass panels. Avoid using cleaning products containing detergents, alcohol, & abrasives to avoid dulling the services and hindering operation. Keep the device clear of humidity, oxidation and foreign bodies. The Nice Apollo EPMOR is designed to be used with devices that are used as presence sensors for automations to doors, gates, garage doors or other similar equipment such as type D devices. Any other uses are considered to be improper usage and are prohibited!
By upgrading two optional components such as the OXIBD receiver and the OX2UBP hardware interface, you can automate your system into the Yubii ecosystem or your preexisting automation system. Any control unit with an SM connector can be enhanced to include automation if it does not already. Ensure that third-party motors can be integrated with the OX2UBP hardware interface upgrade. The nice gateway connects with systems such as Yubii to personalize control from anywhere by using a smartphone or by setting a key on the bidirectional remote control. Over 3000 third- party interfaces are compatible, Please check with your manufacturer to see if this feature applies to your system.
|
-Presence detector for automated gates and doors
-Fixed or positionable synchronized photocells
-Built-in LED light
-Simple installation only requires wiring to the main photocell
-Anti-glare circuit which eliminates possible sunlight interference
-Detection of opaque objects larger than 50 mm along the line of sight between the photocell and the reflector
-External entrapment protection device Type B1, complies with UL 325 requirements. (US only)
|
|
GateCrafters.com has the resources you need.
How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question.
We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
Type of product: Presence detector for automated gates & doors
Technology adopted: Indirect optical interpolation by means of a photocell and a reflector, with modulated opto beam
Power supply: 12-24 V
Power supply/output: The device may be connected only to a control unit (or interface) equipped with “BlueBus” technology. The electrical power is drawn from this device, where the output signals are sent
Absorption (mA): 50
Maximum absorbed current: 1 “BlueBus” unit
Response time: Under 30 ms
Range: Useful range 8 m maximum range, in optimal conditions, 15 m. The maximum range may drop by 50% in adverse weather conditions (fog, rain, dust, etc.)
Relay range: Max 500 mA and 48 V
Detection capacity: Opaque objects larger than 50 mm along the line of sight between the photocell and the reflector (maximum speed 1.6 m/s)
Protection rating class: IP 44
Operating temperature: -20°C to +50°C
Assembly: Elements facing one another, anchored to two vertical surfaces parallel to one another or to an appropriate column support.
System for adjusting the alignment between the photocell and the reflector: Yes
|
Included with single photo eye
(1) EPMOR- Reflective outdoor photocell + reflective mirror
(1) ELMM- LED light module for EPMOR
|
|
GateCrafters.com is the DIY factor.
GateCrafters.com further adds to most of our gate openers for easier DIY installation.
We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener.
In addition we have the largest staff of factory trained technicians in the US.
|
|
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by GateCrafters, however, most tools
are available at local hardware stores for purchase or rental.
Please refer to manual for Tools Needed.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
|
|
Words from Senior Application Engineer, Anthony Geato
|
Top of Page
|
|
"Apollo has been a quality name for years in the gate opener industry, plus the choice of many professional installers. Coming from Texas, the people at Apollo know and understand the convenience a gate opener can add to a ranch or home."
|
GateCrafters.com has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories.
All these factors are what have lead to us having so many exclusive additions.
When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Manual: EPMOR User Manual
Manual: EPMOR- Information Sheets
QB ID: EPMORB/A
|
|