Viking VA-E4 Residential Single Swing Gate Operator - Arm Only

The E4 Residential Swing Gate Operator offers top-tier performance with a maximum gate capacity of 850 lbs. for 10-foot gates or 550 lbs. for 16-foot gates, operates at speeds of 12-16 seconds per 90°, and features a streamlined control board designed for easy installation of single or dual gates.

• Gate Materials: Wood, Steel, Aluminum, Vinyl, and others.
• Weight and length: Up to 850 lbs. for 10 ft. gates or 550 lbs. for 16 ft. gates
• Max degree of opening: 110 degrees
• Gate Post or Column size (pull to open): 3", 4" or 6" square post
• Push to Open: Yes
• Solar Compatible: Yes (purchased separately)
• Power: 115/230 VAC - 24 V AC/DC
• Power Wire Specification: 10 gauge wire (purchased separately). Maximum distance of 1,000 ft.
• Operating Temperature: -20°F up to +160°F
• Warranty: 3 year manufacturer warranty

 Viking E4 Residential Single Swing Gate Opener

The new E4 Residential Swing Gate Operator leads the industry in being the best, most cost effective residential linear arm actuator. This new design allows for a maximum gate capacity of 850 lbs. for 10-foot gates or 550 lbs. for 16-foot gates. Featuring a convenient manual release handle and pre-wiring for an easy and quick installation. It is ready to be powered with low voltage wiring, allowing installation versatility and accuracy.

• Maximum Gate Capacity: Up to 850 lbs. for 10 ft. gates or 550 lbs. for 16 ft. gates
• UL 325 Classification: Class I 
• Duty Cycle: 100% 
• Operating Voltage: 24VDC
• Voltage Current Specs: 120VAC - 2.0 or 240VAC - 1.0 (each motor)
• Main Power Frequency: 50Hz / 60Hz
• Main Power Fuse: 4A Timed
• Alternative Power Source: 24VAC / VDC (60VA) or Solar
• Accessory Power: 24VDC - 750mA
• Power Consumption - Sleep: 6mA
• Motor Current (Typical): 3.0A
• Operating Temperature: -20°F (-28°C) to 160°F (71°C)
• Opening Angle: 110°
• Gate Speed: 13-16 sec./90°
• Battery Backup: 400 Continuous Cycles

Operator and Parts

• (1) Viking E4 Swing Gate Operator
• (1) Viking ECU Single

Accessories (brand is based on kit option selection)

• (1) 433 Mhz Receiver (LiftMaster is 315Mhz)
• (2) 433 Mhz RC Transmitter (LiftMaster is 315Mhz)
• (1) Photocell 10K Resistor
• (2) Photocell Adapter

Depending on your chosen option - Viking FAAC, LiftMaster, or Estate Swing - you will receive accessories from the corresponding brand. For example, if you select the option Estate Swing 433 MHz + 2 Free Remotes, you will receive an Estate Swing receiver, transmitter, photocell and adapter. 

Disclaimer: The "Operator Only" option does not include accessories. Please be advised that if you select "Operator Only," you will receive only the operator.

For over a decade, Gate Crafters has been the leading online retailer of gate openers and accessories. With our extensive technical and installation expertise, we proudly serve the DIY market. We believe that every customer deserves the chance to take pride in their projects, whether they are installing or troubleshooting their gate openers. Everyone should have access to high-quality products without the need of a professional. At Gate Crafters, we empower you to install with confidence by offering access to our trained technical staff seven days a week from 9 AM to 9 PM EST. By choosing to tackle your gate opener system yourself, you can save thousands of dollars over its lifespan while gaining valuable knowledge about your installation and how the system operates. This understanding will not only make troubleshooting easier, but also enable you to perform routine maintenance with confidence in the future.

Gate Crafters is the DIY factor. Gate Crafters further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.     DIY Additions Top of Page Order specific customized accessory wiring instructions 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit. Free 24/7/365 Installation Support Free 7 day/week Technical Support Largest Number of Certified Techs in America Free assistance to find the right gate opener for your gate Free systems design assistance to match the right accessories to fit your needs. Extremely competitive pricing Free shipping on all accessories purchased with a gate opener We stock replacement parts Many brands of many types of accessories, enough to handle just about any operational situation you can imagine Gate Crafters has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.     Tools & Supplies for Installation Top of Page The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by Gate Crafters, however, most tools are available at local hardware stores for purchase or rental. Please refer to the Installation Manual for Tools Needed. Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.     Product Media Top of Page