USAutomatic Wireless Keypad (24 access codes) 050500 - Plastic Body


US Automatic Wireless Keypad
  • US Automatic Wireless Keypad
Please Select an Option: 

Price: $52.10
In Stock
Quantity:


bookmark this pageSave this page

Chat with a live representative or Send us an email

1-800-537-4283




   Related Products
   Product Details

  • Compatibilities
    		•
  • Accessory Features
    		•
  • Accessory Programming
    		•
  • Product Media
    		•

       Accessory Compatibilities Top of Page

    The USAutomatic 50500 LCR Wireless Keypad is compatible with:

  • U.S. Automatic Sentry 300 Series Single/Dual Swing Solar Gate Opener
  • U.S. Automatic Patriot Single/Dual Swing Solar Gate Operator
  • U.S. Automatic Patriot RSL Single Slide Gate Operator

    • GateCrafters.com offers more expert assistance than anyone. We have live application specialists available 9am - 9 pm EST 7 days a week.

       Accessory Features Top of Page

    Access Code– The 2 to 5-digit code used to open the gate (24 unique codes are possible). If access code is less than 5 digits it requires the # sign after code is entered. Example: “2 #.” If code is 5 digits the # sign is not required.

    Master Password– The 5-digit code used to access programming features. Factory default is “11111”. This should be changed for security reasons. NOT USED TO OPEN GATE.

    Relay 1– The receiver has 2 relays. P1 (relay 1) is pre-wired to the J1 connector.

    Relay 2– The receiver has 2 relays. P2 (relay 2) is pre-wired to the “Open/Free Exit” on J1 connector. Keypad Security Code (Dip Switch Code) – This code makes your keypad unique to your installation. Keypad does not have dip switches like the transmitter; instead it has virtual dip switches which must be programmed.

    PUK Code– “Password Unblocking Key.” The PUK code is located inside the keypad and is needed when the master password has been lost. Record in space above for future reference. Must be 5 digits long.

    “ * ” Key– located on the keypad is used to cancel last command entered.

    Red Light Blinks – When blinking, the keypad is sending a signal to the receiver. Valid access code was entered.

    Note: Do not install keypad until “Learning Access Codes in Receiver” has been completed.

    GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.

       Accessory Programming Top of Page

    Programming New Master Password:
  • Enter the Master Password “11111”.
  • Enter “8” If correct, 2 short beeps (if 1 long beep is heard, start over with step 1).
  • Enter the Master Password (up to 5 digits), if less than 5 digits, “#” is required.
  • Enter “8”
  • Enter the Master Password again to verify.
  • Press “8” If correct, 2 short beeps - New Master Password is set (If 1 long beep is heard, start over with step 1).

    • Programming Master Password Back to Factory Default: (11111)
  • Enter “11111”.
  • Press “8” (long beep).
  • Enter PUK code. (PUK must be 5 digits).
  • Press “8”.
  • Enter PUK code to confirm.
  • Press “8” (2 beeps) Master password reset complete.

    • Programming the Keypad for Operation
  • Create Access Code: (Code you use to operate the gate)
  • Enter the Master Password “11111”.
  • Enter “9” If correct, 2 short beeps (if 1 long beep is heard, start over with step 1).
  • Enter the new Access Code (up to 5 digits), if less than 5 digits, “#” is required.
  • Enter “9”
  • Enter the new Access Code again to verify.
  • Enter “1” or “2” representing the relay (relay 1 or 2 in the receiver) you want to control.
  • If correct, 2 short beeps (if 1 long beep is heard, start over with step 1).
  • Now carry keypad to receiver and go to “creating communication with relay 1” below to complete programming.

    • GateCrafters.com has the resources you need. How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question. We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.

       Product Media Top of Page


    Manual: USAutomatic Wireless Keypad Manual
    QB ID: 050500
       Reviews Top of Page
    Rating Snapshot


    Select a row below to filter reviews
    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%
    Average Customer Rating


    Overall
    Reviews (3)
    << < > >>